Miscellaneous Logging  

M4309

Weather Head and Hose Assembly Kit, Contains Weather Head T-420 Crimper with all Dies, Weather Head Hose Saw.  Shelves and bins included, already numbered with books. 200 plus different hose end sizes and styles. Sizes1/4, 3/8, 1/2, 3/4, 1in. in both

2 wire and 4 wire. In Wisc. $8,900

U3710

Sawmill, 2 strand log deck, HMC debarker,

Log transfer table-2strand, Cleereman carriage,

and sawyer coop, vertical edger, Circular saw

powered with a Cat engine. Lumber transfer deck,

trim saw, trimmed lumber transfer deck, Chipper

with 75hp.electric engine-2blower chutes, Sawdust

conveyor, blower and pipes, Bark conveyor, electric panels

soft panel,  air compressor with tanner gas syster, In Mich.

906-238-4417

MJ2710

Jackson Saw mill, carraige powered by 350

Cummin with Sawyers cab, Live deck, Log

turner, Hydraulic power unit, Jackson Bull

Edger, Swing borad/ slab saw, 3 insert tooth

saws, 2 saw board Edger. all sawdust conveyors,

IH International 7000 Fork lift. In Wisc. $16,900

G71610

Waechter 3 Head Resaw with return, no power.

Amish ready. In Wisc. $10,250

K11309

Frick Timber King JR. Saw Mill, 3-phase

electric, hydr. Log turner has missing saw blade

and power unit, but can find them. In Wisc.

$9,500 OBO

D5909

Wood Beaver, Firewood Processor, PTO

or 20hp. electric , 220 volt. 2years old, complete

rebuilt, 900hrs. In Wisc. $33,500

N102409

Dyna Firewood Processor. New!  prices start at

$13,900, In Wisc.

DM2710

Front                              Back

West Side Iron Works 36in Band Saw, early

1800-1900. Many people use them as a re-saws.

This is a Museum quaitly, No brazing, no repaires,

no missing or frozen up parts. Set up for 6in. Flat belt.

 It has a  Fairbanks Morse electric motor with the

original 6in. pulley. Owner needs a wheel loader

and a used 26,000 lbs. trailer. In Wisc. $8,000

H81508

Fire Wood processor with splitter, this is a Repo.

and a project. Will do 12-14 in. cord per hr.

with 2-men. In Mich. sale or trade. $16,000

N4810

Complete Chippin Operation For Sale As Package

2001 Bandit 1850 Chipper 8.1 liter John Deere

275hp. 1400hrs. 1999 Wabash 3-axle chip van,

1998 Trailmoble chip van, 1993 Kenworth with Cat

engine. In Mich. $59,500

T112609

Morbark 2455 model Flail Chipper good

working machine comes with $60,000 in

spare parts, In Wisc. $450,000

MJ1002909

2005 Morbark 1300A Tub Grinder, serial# 571-447,

approx. 3600hrs. framed hours. Cat 3412ETTA-1000hp.

engine with balance of 5yr/6000hrs, extended warranty

thru 10-2010. Cab wigh a/c, heat, am-fm radio, cb. Morlift

400 Grapple assy. mounted air compressor on unit, mag

head on conveyor with nail discharge chute, new conveyor

rollers, conveyor belt. tires are all at 90%, reworked  Mill

assy-including all new wear plates, new hammers, new rods,

new insert, mill bearings repacked, new augers and shafts,

new auger bearings, new chain motor sprockets. Many

new body parts such as new tub ring assy. conveyor pans,

new nail chut, air filter houseings, complete new paint and decals.

Unit has 2hrs since going through machine. In Ohio $249,000

111007

Morbark 5600 Wood Hog, Horizontial

Grinder, 860hp, V12 Cat approx. 5000hrs.

$157,500

MJ12208

Montgomery Wood Hog with conveyor,

on trailer. 30in cap.  Motor and soft start

have been removed. In OHIO.

$10,500

H-112507

410 Prentice Loader, 1980 model. 653

Detroit. 3/4 cord grapple.

W62810

Hood Slasher table, will consider trades.

In Mich. $4,700

J51310

Hood slasher table, In Mich. $2,900

  SN-10408

                                         

2000  S/N 6108 Hood Slasher, John Deere engine, 27ft Boom, 60in. Saw, angle Drive Saw motor, flip and slide Head board. Cut 16ft. mounted on good Chevy Bison, V-8 Detroit.  20000  Hood Loader  Will consider trade. $27,000 OBO. Reduced!

   

P1910

1987 Mack model R with 300 engine, 10spd. trans, 10ft. 2in. Slasher table, 60in Saw

In Wisc. $15,900

S10209

1989 182S Hood Slasher, new hydr. pump,

 many new hoses both swing motors and

gear boxes rebuilt. 16ft Saw bunk, good running

machine. $24,000

P53110

Prentice 180 D with CTR 16ft. Bar saw table,

newer engine and hydr. pump. Truck has bad

engine. In Wisc. $12,500

D22509

Hood 20000 Slasher, cuts 8ft. to 12ft. $24,500

W62810

1999 310 E Slasher and Ctr 42in Bar Saw

slasher, 310 has a loose swing bearing but

pins are very tight and it runs well.  Will

consider trades. $16,500 for pair or OBO.

In Mich.

PD12309

1989 John Deere 693 D with Denarhco

3000 chain drive Delimber. New drive Delimber

motor, new swing gear system(gear box-swing reducer).

New Boom chain, New Turbo & fuel injection pump,

new drive motor right side.Undercarriage at 80%,

fuel fired Wobasto heater for engine & hyde. system

Unit has Automatic fire Suppression system, A/C.

Lots of spare parts. $35,000 Canadian funds.

P53110

John Deere 590 Pro-pack, 453 Delimber

with top Shear, 7980hrs. 4293 on engine

and Hydr. pump. New Undercarriage, In Wisc.

$15,500

H1-12408

 1997 Hyundai 280 with 3500 Denarco Stroke

Delimber approx. 10,000hrs. $62,500

MJ-506

1187B Case D-3000 Model Deni Delimber.

Reuilt engine, new Hydr. pump, Good

undercarriage. $36,000

T82506

Morbark model 30 Chipper, good working

condition, approx. 2700hrs. In Wisc. $305,000

FT-21909

1986 Morbark model 27 Chipper. V12Cat 800Hp.

Strong motor, new drive belts, feed chain and

sprockets, new tires, brakesat 60%.New hydraulic

pumps. Disc bearing cleaned, repacked. Adjusted

and retorqued. Disc in very good shape. Working

everyday. Plus $10,000 worth of repairs have been

made.  Includes grinder and extra knives.

 In Wisc. $120,000

K31510

Morbark model 22 Chip havester s/n 1140 (No Flail)

runs great, Cummins and Detroit powered. Spare

engines and misc. spare parts also available for

sale. In Ohio $36,000

M101909

1995 Morbark Model 20 KBL series #222

approx. 6000hrs, 20in. capacity. Cat engine

3806C 400hp. Rebuilt by Ziegla Cat 1,500hrs

ago. 58in- 3 poket disc ith extra knifes. In

Wisc. $87,500

Z11709

1986? Trelan Chipper 18DL, Air brake axles,

Cat 400 engine, new clutch, separator, roller

and chainfeed. Extra knives and parts. In Mich. $52,500

JP-606

1990 Tree Bandit Model 1400 Chipper.

Cummins 200 Hp, Log loader, winch.

Excellant condition. $26,000. OBO.

V5809

Verneer 1250 Chipper 1957hrs. Perkins

diesel, In Wisc. $10,900 OBO

S53109

Morbark PS 8, Post peeler, approx 400hrs.

353 Detroit engine. Hydr. end feed, conveyor

In Wisc. $24,900

L-111007

2005 Eco Tech EZ Wood Chip

Colorizer, fits horizontial Grinders.

Uses Dry Colorant. New never used.

$13,300

----------------------------------------------------------------------------------------------------------------------------------------------------------

For more information call: 715-735-7634

----------------------------------------

61507

O" Frick, All Steel, 4-Headblocks, Saw Dust

Blower with 100+feet of 8"-8 Guage pipe,

3 strand hyd. live Log deck. 125hp. Electric

motor, 54" Simmond Saw, rollers, wrench,

bits. 3-gang Saw Frick Timber Tiger edger

25hp electric motor.$11,900

 

425 Prentice ATL, 2-Machines available

Now! 1996 Models, 15000Hrs.Approx.

$112,000 Canadian funds

D72609

2-1997 Prentice ATL 625, 1.5 Cord Pulp

Grapple with chains, 260 Mercedes Electric

engine 5000hrs. 2-new spare tires. Service and Parts

manuals, filter and other service parts.

Meticulously maintained. $127,500 Candian.For pair,

or $76,000 Canadian for one.

T909

Prentice 150 RM 22' Boom lever control.

Closed Cab, 1/3 cord Pulp bucket.$10,900

TK61010

Prentice 120 Truck Loader s/n Z37019, lever

controls, new seat. In Mich. $11.500

#197

JR. Retro Nailing Machine, will make 2 thru 5

Stringer Pallets with feeder, all Hydr. Stacker

16ft. of rollers lots of parts. $23,500

91407

61/2 Axle for loader Dray. 5-hole wheels,

8.25x20 tires. $200.00

Miscellaneous Logging 2